Call 509.326.7100 | Text 929.352.0876 | M-F 9am-5pm PST

Welcome home, beautiful!

Free Shipping

DIY: How to Create a Braided Weave with Full Coverage and Open Part Lines

Braided Weave:

Learn how to create a braided weave.

Items Needed:
Wefted Hair
Weave Needle
Thread
Weaving Cap
Sheers
Rubber Bands

Steps:
1. Start with hair cornrowed, expect for the front hairline and a small section of the top part.
2. Fold a cornrow up and ends down so that they are sitting in the groove between braids.
3. Put the weave needle through the braid and tack stitch the braid into place.
4. Repeat for the rest of the braid tails.
5. Place a weave cap over the cornrows.
6. Pull the front hair forward and band it out of the way.
7. Cut out a notch for the top part section.
8. Put the weaving needle through a cornrow, weave cap, and back through the thread to anchor the weave cap into place.
9. Continue sewing the cap to the braided base until it is secure.
10. Cut off the weave cap tag (if applicable).
11. Begin sewing the wefts onto the cap starting as low as possible for maximum coverage.
12. Continue working in rows up the head until you reach the crown.
13. Use smaller rows on the crown with hair going the direction you need it to for the finished style.
14. Style.

The Amazing Items Used for this Tutorial


2 thoughts on “DIY: How to Create a Braided Weave with Full Coverage and Open Part Lines”

  • Jolene
    March 21, 2017 at 12:52 am

    Hurrah, that's what I was searching for, what a material!
    present here at this blog, thanks admin of this site.

    Reply
    • Kat Jones
      March 21, 2017 at 2:51 am

      Excellent! You are welcome!

      Reply
Leave a Reply
  • Reload captcha
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.